Types of Stainless Steel Offset Hinge for Doors

Types of Stainless Steel Offset Hinge for Doors

The stainless steel offset hinges are used to attach the cards of credit cards.stainless steel offset hinge It is commonly used for billing or account number establishments and has a universal mounting hole that fits into any hole and is widely preferred due to its universal use. They are manufactured with the two per card and flexible mounting screws that ensure a secured and reliable hold to the card.

This stainless steel hinge gives the user a simple and elegant way to maintain records in an organized manner. The advantage of the two per card hinge is that it adds an extra layer of security to the credit card and the customer is sure that it is tamper-free. The hinge consists of a single card holder on one side and a flexible post on the other. The post is designed to have a clear view of the information that is being printed on the card. There are also some designs of the two-card hinge where the card can be folded so as to create an open space inside the holder.

The two-card offset hinges are designed to have an offset design and they have been manufactured to have an opening at the top of the latch. This design provides easy access to the cardholder when it is needed. The top of the latch is stapled with a durable rubber and the hinges are arranged so as to prevent the cardholder from bending down sideways. There is a stamped area at the top edge of the latch for the cardholder to insert their card without any difficulty. The stamping is done on both sides and both back surfaces of the hinge.

In the manufacture of the two-card, lightweight offset cardholders, which are called as two card quick fit, there is a short side hinge that can be fastened to the top of the cardholder or it can also be fastened to the cardholder's side. The fastener is provided with a flexible post clip so that it can be adjusted as per the size of the cardholder. There is a second clip on the other side of the fastener so that the holder can be folded flatly.

One of the most common types of cardholders is the one card holder and the other is called as the double card holder. Both these holders have the characteristic of having the front surface of the holders being made up of stampings of different colors. However, the fastener in this case is smaller in size. It is made up of a spring steel with the rectangular post inserted into it. The rectangular post has holes with the size corresponding to the width of the card that is to be inserted. Hence, it is convenient to use.

Another type of holders is the card holder with the raised front surface. It is made up of the same stampings that are found in the double card holder. But, the fastener here is much smaller in size and is inserted through an opening in the top of the back panel of the door. Hence, this type of holder is widely used in places where space is a constraint.